A quick setup guide for Win32 and Win64 with recommended configuration.
Unless you know exactly what you are doing, you should strictly follow the recommendations below. They are known to work and if the build breaks, please re-read this guide carefully.
Known traps are:
Chocolatey tends to install packages into its own path (%ChocolateyInstall%),
although packages are free to use their own preferences (Python for example is
C:\Python37). You can install Chocolatey packages using the
choco install (or its shorthand,
> rem Flex is required. > choco install -y winflexbison3 > rem Git, CMake, Perl, Python, etc are also required, but can be installed > rem via their respective installation packages. > choco install -y git cmake strawberryperl python3
Download and install “Microsoft Visual Studio 2019 Community Edition”. This is a small utility that downloads all the other required parts (which are quite large).
Check the checkbox for “Desktop development with C++” and then uncheck all the optional components other than the “VC++ 2019” item with the “latest … tools”, the “Windows 10 SDK”, and the “Visual C++ tools for CMake” (unless you want to use them for purposes other than Wireshark).
You can use Chocolatey to install Visual Studio, using the Visual Studio Community and Native Desktop workload packages.
PS$> choco install -y visualstudio2019community visualstudio2019-workload-nativedesktop
You can use other Microsoft C compiler variants, but VS2019 is used to build the development releases and is the preferred option. It’s possible to compile Wireshark with a wide range of Microsoft C compiler variants. For details see Section 4.5, “Microsoft compiler toolchain (Windows native)”.
You may have to do this as Administrator.
Compiling with gcc or Clang is not recommended and will certainly not work (at least not without a lot of advanced tweaking). For further details on this topic, see Section 4.4, “GNU Compiler Toolchain (UNIX And UNIX-like Platforms)”. This may change in future as releases of Visual Studio add more cross-platform support.
Why is this recommended? While this is a huge download, the Community Editions of Visual Studio are free (as in beer) and include the Visual Studio integrated debugger. Visual Studio 2019 is also used to create official Wireshark builds, so it will likely have fewer development-related problems.
The main Wireshark application uses the Qt windowing toolkit. To install Qt, go to the “Download Qt” page, select “Go open source”, download the Qt Online Installer for Windows from the Qt Project and select, for the desired Qt version, a component that matches your target system and compiler. For example, at the time of this writing the Qt 5.15.2 “msvc2019 64-bit” component is used to build the official 64-bit packages. The “Qt Debug Information Files” component contains PDB files which can be used for debugging. You can deselect all of the other the components such as “Qt Charts” or “Android xxxx” as they aren’t required.
Note that installation of separate Qt components are required for 32 bit
and 64 bit builds, e.g. “msvc2019 32-bit” and “msvc2019 64-bit”. The
QT5_BASE_DIR should be set as appropriate for your
environment and should point to the Qt directory that contains the bin
directory, e.g. C:\Qt\5.15.2\msvc2019_64
The Qt maintenance tool (C:\Qt\MaintenanceTool.exe) can be used to upgrade Qt to newer versions.
Get a Python 3.x installer from https://python.org/download/ and install Python into the default location (C:\Python37).
Alternatively you can install Python using Chocolatey:
PS$> choco install -y python3
Chocolatey installs Python in C:\Python37 by default.
Alternatively you can install Perl using Chocolatey:
PS$> choco install -y strawberryperl # ...or... PS$> choco install -y activeperl
Please note that the following is not required to build Wireshark but can be quite helpful when working with the sources.
Working with the Git source repositories is highly recommended, as described in Section 3.4, “Obtaining The Wireshark Sources”. It is much easier to update a personal source tree (local repository) with Git rather than downloading a zip file and merging new sources into a personal source tree by hand. It also makes first-time setup easy and enables the Wireshark build process to determine your current source code revision.
There are several ways in which Git can be installed. Most packages are available at the URLs below or via Chocolatey. Note that many of the GUI interfaces depend on the command line version.
If installing the Windows version of git select the Use Git from the Windows Command Prompt (in chocolatey the /GitOnlyOnPath option). Do not select the Use Git and optional Unix tools from the Windows Command Prompt option (in chocolatey the /GitAndUnixToolsOnPath option).
The official command-line installer is available at https://git-scm.com/download/win.
Git Extensions is a native Windows graphical Git client for Windows. You can download the installer from https://github.com/gitextensions/gitextensions/releases/latest.
TortoiseGit is a native Windows graphical Git similar to TortoiseSVN. You can download the installer from https://tortoisegit.org/download/.
The command line client can be installed (and updated) using Chocolatey:
PS$> choco install -y git
A list of other GUI interfaces for Git can be found at https://git-scm.com/downloads/guis
Get the CMake installer from https://cmake.org/download/ and install CMake into the default location. Ensure the directory containing cmake.exe is added to your path.
Alternatively you can install CMake using Chocolatey:
PS$> choco install -y cmake
Chocolatey ensures cmake.exe is on your path.
You can install AsciidoctorJ, Xsltproc, and DocBook using Chocolatey. AsciidoctorJ requires a Java runtime and there are many to choose from. Chocolatey doesn’t support alternative package dependencies at the present time, including dependencies on Java. As a result, installing the asciidoctorj package won’t automatically install a Java runtime — you must install one separately.
PS$> choco install -y <your favorite Java runtime> PS$> choco install -y asciidoctorj xsltproc docbook-bundle
Chocolatey ensures that asciidoctorj.exe and xsltproc.exe is on your path and that xsltproc uses the DocBook catalog.
Get the winFlexBison installer from https://sourceforge.net/projects/winflexbison/ and install into the default location. Ensure the directory containing win_flex.exe and win_bison.exe is on your path.
Alternatively you can install Winflexbison using Chocolatey:
PS$> choco install -y winflexbison3
Chocolatey ensures win_flex.exe is on your path.
|Make sure everything works|
It’s a good idea to make sure Wireshark compiles and runs at least once before you start hacking the Wireshark sources for your own project. This example uses Git Extensions but any other Git client should work as well.
Download sources Download Wireshark sources into C:\Development\wireshark using either the command line or Git Extensions:
Using the command line:
>cd C:\Development >git clone https://gitlab.com/wireshark/wireshark.git
Using Git extensions:
In the main screen select Clone repository. Fill in the following:
Repository to clone:
Destination: Your top-level development directory, e.g. C:\Development.
Subdirectory to create: Anything you’d like. Usually wireshark.
|Check your paths|
Make sure your repository path doesn’t contain spaces.
From the Start Menu (or Start Screen), navigate to the “Visual Studio 2019” folder and choose the Command Prompt appropriate for the build you wish to make, e.g. “x64 Native Tools Command Prompt for VS 2019” for a 64-bit version or “x86 Native Tools Command Prompt for VS 2019” for a 32-bit version. Depending on your version of Windows the Command Prompt list might be directly under “Visual Studio 2019” or you might have to dig for it under multiple folders, e.g. → → .
You can set up a build environment in your own command prompt by running the appropriate
See Use the Microsoft C++ toolset from the command line for details.
|Pin the items to the Task Bar|
Pin the Command Prompt you use to the Task Bar for easy access.
All subsequent operations take place in this Command Prompt window.
Set environment variables to control the build.
Set the following environment variables, using paths and values suitable for your installation:
> rem Let CMake determine the library download directory name under > rem WIRESHARK_BASE_DIR or set it explicitly by using WIRESHARK_LIB_DIR. > rem Set *one* of these. > set WIRESHARK_BASE_DIR=C:\Development > rem set WIRESHARK_LIB_DIR=c:\wireshark-win64-libs > rem Set the Qt installation directory > set QT5_BASE_DIR=C:\Qt\5.15.2\msvc2019_64 > rem Append a custom string to the package version. Optional. > set WIRESHARK_VERSION_EXTRA=-YourExtraVersionInfo
Setting these variables could be added to a batch file to be run after you open the Visual Studio Tools Command Prompt.
|Use Qt’s LTS branch|
We recommend using the most recent “long term support” branch of Qt5 to compile Wireshark on Windows. At the time of writing this is Qt 5.15.
Create and change to the correct build directory. CMake is best used in an out-of-tree build configuration where the build is done in a separate directory to the source tree, leaving the source tree in a pristine state. 32 and 64 bit builds require a separate build directory. Create (if required) and change to the appropriate build directory.
> mkdir C:\Development\wsbuild64 > cd C:\Development\wsbuild64
to create and jump into the build directory.
The build directory can be deleted at any time and the build files regenerated as detailed in Section 2.2.12, “Generate the build files”.
CMake is used to process the CMakeLists.txt files in the source tree and produce build files appropriate for your system.
You can generate Visual Studio solution files to build either from within Visual Studio, or from the command line with MSBuild. CMake can also generate other build types but they aren’t supported.
The initial generation step is only required the first time a build directory is created. Subsequent builds will regenerate the build files as required.
If you’ve closed the Visual Studio Command Prompt prepare it again.
To generate the build files enter the following at the Visual Studio command prompt:
> cmake -G "Visual Studio 16 2019" -A Win32 ..\wireshark
Adjusting the paths as required to Python and the Wireshark source tree.
To use a different generator modify the
cmake -G lists
all the CMake supported generators, but only Visual Studio is supported
for Wireshark builds.
To build an x64 version, specify it as the architecture,
-G "Visual Studio 16 2019" -A x64:
> cmake -G "Visual Studio 16 2019" -A x64 ..\wireshark
The CMake generation process will download the required 3rd party libraries (apart from Qt) as required, then test each library for usability before generating the build files.
At the end of the CMake generation process the following should be displayed:
-- Configuring done -- Generating done -- Build files have been written to: C:/Development/wsbuild64
If you get any other output, there is an issue in your environment that must be rectified before building.
Check the parameters passed to CMake, especially the
-G option and the path to the Wireshark sources and
the environment variables
Now it’s time to build Wireshark!
> msbuild /m /p:Configuration=RelWithDebInfo Wireshark.sln
to build Wireshark.
You may also open the Wireshark solution file (Wireshark.sln) in the Visual Studio IDE and build there.
If compilation fails for suspicious reasons after you changed some source
files try to clean the build files by running
The build files produced by CMake will regenerate themselves if required by changes in the source tree.
You can debug using the Visual Studio Debugger or WinDbg. See the section on using the Debugger Tools.
To build the Wireshark User’s Guide and the Wireshark Developer’s Guide
all_guides target, e.g.
Detailed information to build these guides can be found in the file
docbook\README.adoc in the Wireshark sources.
Note: You should have successfully built Wireshark before doing the following.
If you want to build your own Wireshark-win32-3.5.1-myprotocol123.exe, you’ll need NSIS. You can download it from http://nsis.sourceforge.net.
Note that the 32-bit version of NSIS will work for both 32-bit and 64-bit versions of Wireshark. NSIS v3 is required.
If you’ve closed the Visual Studio Command Prompt prepare it again.
> msbuild /m /p:Configuration=RelWithDebInfo nsis_package_prep.vcxproj > msbuild /m /p:Configuration=RelWithDebInfo nsis_package.vcxproj
to build a Wireshark installer. If you sign your executables you should do so between the “nsis_package_prep” and “nsis_package” steps.
to test your new installer. It’s a good idea to test on a different machine than the developer machine. Note that if you’ve built an x86 version, the installer name will contain “win32”.