Display Filter Reference: Xpress Transport Protocol
Protocol field name: xtp
Versions: 1.2.0 to 2.6.1
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| xtp.aseg.address | Traffic | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.aseg.adomain | Domain | Unsigned integer, 1 byte | 1.8.0 to 2.6.1 |
| xtp.aseg.aformat | Format | Unsigned integer, 1 byte | 1.2.0 to 2.6.1 |
| xtp.aseg.alen | Length | Unsigned integer, 2 bytes | 1.2.0 to 2.6.1 |
| xtp.aseg.dsthost | Destination host | IPv4 address | 1.2.0 to 2.6.1 |
| xtp.aseg.dstport | Destination port | Unsigned integer, 2 bytes | 1.2.0 to 2.6.1 |
| xtp.aseg.srchost | Source host | IPv4 address | 1.2.0 to 2.6.1 |
| xtp.aseg.srcport | Source port | Unsigned integer, 2 bytes | 1.2.0 to 2.6.1 |
| xtp.bad_checksum | Bad checksum | Label | 2.4.0 to 2.6.1 |
| xtp.checksum | Checksum | Unsigned integer, 2 bytes | 2.0.0 to 2.6.1 |
| xtp.checksum.status | Checksum Status | Unsigned integer, 1 byte | 2.4.0 to 2.6.1 |
| xtp.cmd | Command | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.cmd.options | Options | Unsigned integer, 3 bytes | 1.2.0 to 2.6.1 |
| xtp.cmd.options.btag | BTAG | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.dreq | DREQ | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.edge | EDGE | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.end | END | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.eom | EOM | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.fastnak | FASTNAK | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.multi | MULTI | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.nocheck | NOCHECK | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.noerr | NOERR | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.noflow | NOFLOW | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.rclose | RCLOSE | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.res | RES | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.sort | SORT | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.sreq | SREQ | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.options.wclose | WCLOSE | Boolean | 1.2.0 to 2.6.1 |
| xtp.cmd.ptype | Packet type | Unsigned integer, 1 byte | 1.2.0 to 2.6.1 |
| xtp.cmd.ptype.pformat | Format | Unsigned integer, 1 byte | 1.2.0 to 2.6.1 |
| xtp.cmd.ptype.ver | Version | Unsigned integer, 1 byte | 1.2.0 to 2.6.1 |
| xtp.cntl.alloc | Allocation | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.cntl.echo | Synchronizing handshake echo | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.cntl.rseq | Received sequence number | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.data | Data | Sequence of bytes | 2.0.0 to 2.6.1 |
| xtp.data.btag | Beginning tag | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.diag.code | Diagnostic code | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.diag.msg | Message | Character string | 1.2.0 to 2.6.1 |
| xtp.diag.val | Diagnostic value | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.dlen | Data length | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.ecntl.alloc | Allocation | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.ecntl.echo | Synchronizing handshake echo | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.ecntl.nspan | Number of spans | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.ecntl.rseq | Received sequence number | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.ecntl.span_le | Span left edge | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.ecntl.span_re | Span right edge | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.key | Key | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.seq | Sequence number | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.sort | Sort | Unsigned integer, 2 bytes | 1.2.0 to 2.6.1 |
| xtp.spans_bad | Number of spans incorrect | Label | 2.4.0 to 2.6.1 |
| xtp.sync | Synchronizing handshake | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.tcntl.alloc | Allocation | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.tcntl.echo | Synchronizing handshake echo | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.tcntl.rseq | Received sequence number | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.tcntl.rsvd | Reserved | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.tcntl.xkey | Exchange key | Unsigned integer, 8 bytes | 1.2.0 to 2.6.1 |
| xtp.tspec.format | Format | Unsigned integer, 1 byte | 1.2.0 to 2.6.1 |
| xtp.tspec.inburst | Incoming burst size | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.tspec.inrate | Incoming rate | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.tspec.maxdata | Maxdata | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.tspec.outburst | Outgoing burst size | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.tspec.outrate | Outgoing rate | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
| xtp.tspec.service | Service | Unsigned integer, 1 byte | 1.2.0 to 2.6.1 |
| xtp.tspec.tlen | Length | Unsigned integer, 2 bytes | 1.2.0 to 2.6.1 |
| xtp.tspec.traffic | Traffic | Unsigned integer, 4 bytes | 1.2.0 to 2.6.1 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ Packet Analyzer PE
- • Visually rich, powerful LAN analyzer
- • Quickly access very large pcap files
- • Professional, customizable reports
- • Advanced triggers and alerts
No, really, I have a LOT of traffic…
ANSWER: SteelCentral™ NetShark appliance
- • Troubleshoot problems faster
- • Quickly identify the applications running on your network
- • Monitor your virtual machine traffic