Display Filter Reference: Sequenced Packet eXchange
Protocol field name: spx
Versions: 1.0.0 to 3.4.4
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| spx.ack | Acknowledgment Number | Unsigned integer, 2 bytes | 1.0.0 to 3.4.4 |
| spx.alloc | Allocation Number | Unsigned integer, 2 bytes | 1.0.0 to 3.4.4 |
| spx.ctl | Connection Control | Unsigned integer, 1 byte | 1.0.0 to 3.4.4 |
| spx.ctl.attn | Attention | Boolean | 1.0.0 to 3.4.4 |
| spx.ctl.eom | End of Message | Boolean | 1.0.0 to 3.4.4 |
| spx.ctl.ext_header | Extended Header | Boolean | 1.12.0 to 3.4.4 |
| spx.ctl.neg_size | Negotiate Size | Boolean | 1.12.0 to 3.4.4 |
| spx.ctl.reserved | Reserved | Boolean | 1.12.0 to 3.4.4 |
| spx.ctl.send_ack | Send Ack | Boolean | 1.0.0 to 3.4.4 |
| spx.ctl.sys | System Packet | Boolean | 1.0.0 to 3.4.4 |
| spx.ctl.v2 | SPXII Packet | Boolean | 1.12.0 to 3.4.4 |
| spx.dst | Destination Connection ID | Unsigned integer, 2 bytes | 1.0.0 to 3.4.4 |
| spx.neg_size | Negotiation Size | Unsigned integer, 2 bytes | 1.12.0 to 3.4.4 |
| spx.rexmt_data | Retransmitted data | Sequence of bytes | 2.0.0 to 3.4.4 |
| spx.rexmt_frame | Retransmitted Frame Number | Frame number | 1.0.0 to 3.4.4 |
| spx.seq | Sequence Number | Unsigned integer, 2 bytes | 1.0.0 to 3.4.4 |
| spx.src | Source Connection ID | Unsigned integer, 2 bytes | 1.0.0 to 3.4.4 |
| spx.type | Datastream Type | Unsigned integer, 1 byte | 1.0.0 to 3.4.4 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance