Display Filter Reference: Signaling Compression

Protocol field name: sigcomp

Versions: 1.0.0 to 2.6.3

Back to Display Filter Reference

Field name Description Type Versions
sigcomp.accessing_state ### Accessing state ### Sequence of bytes 2.0.0 to 2.6.3
sigcomp.addr Addr Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.addr.output.start %Output_start[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.all_remaining_parameters All remaining parameters = 0(Not in the uploaded code as UDVM buffer initialized to Zero Label 2.0.0 to 2.6.3
sigcomp.byte_code_length Byte code length Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.byte_copy byte copy Sequence of bytes 2.0.0 to 2.6.3
sigcomp.calculated_sha_1 Calculated SHA-1 Sequence of bytes 2.0.0 to 2.6.3
sigcomp.code.len Code length Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.compression-ratio Compression ratio (%) Unsigned integer, 4 bytes 1.0.0 to 2.6.3
sigcomp.copying_bytes_literally Copying bytes literally Sequence of bytes 2.0.0 to 2.6.3
sigcomp.copying_value Copying value Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.creating_state ### Creating state ### Sequence of bytes 2.0.0 to 2.6.3
sigcomp.current_instruction Addr Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.data_for_sigcomp_dissector Data handed to the Sigcomp dissector Sequence of bytes 2.0.0 to 2.6.3
sigcomp.decompress_instruction Instruction Label 2.0.0 to 2.6.3
sigcomp.decompression_failure DECOMPRESSION-FAILURE Unsigned integer, 4 bytes 2.0.0 to 2.6.3
sigcomp.decompression_failure_expert DECOMPRESSION FAILURE Label 2.2.0 to 2.6.3
sigcomp.destination Destination Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.end_of_sigcomp_message_indication_found End of SigComp message indication found Label 2.0.0 to 2.6.3
sigcomp.escape_digit_found Escape digit found Label 2.0.0 to 2.6.3
sigcomp.execution_of_this_instruction_is_not_implemented Execution of this instruction is NOT implemented Label 2.0.0 to 2.6.3
sigcomp.failed_to_access_state_wireshark_udvm_diagnostic Failed to Access state Wireshark UDVM diagnostic Label 2.0.0 to 2.6.3
sigcomp.getting_value Getting value Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.illegal_escape_code Illegal escape code Label 2.0.0 to 2.6.3
sigcomp.instruction_code Instruction code Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.invalid_instruction Invalid instruction Label 2.0.0 to 2.6.3
sigcomp.invalid_shift_value Invalid shift value Label 2.0.13 to 2.0.16, 2.2.7 to 2.6.3
sigcomp.length Partial state id length Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.load_bytecode_into_udvm_start Load bytecode into UDVM starting at Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.loading_h Loading H Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.loading_result Loading result Label 2.0.0 to 2.6.3
sigcomp.loading_value Loading value Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.max_udvm_cycles maximum_UDVM_cycles Unsigned integer, 4 bytes 2.0.0 to 2.6.3
sigcomp.memory_size Memory size Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.message_decompressed SigComp message Decompressed Sequence of bytes 2.0.0 to 2.6.3
sigcomp.message_decompression_failure SigComp message Decompression failure Label 2.0.0 to 2.6.3
sigcomp.message_length Message Length Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.min.acc.len %Minimum access length Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.nack.cycles_per_bit Cycles Per Bit Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.nack.failed_op_code OPCODE of failed instruction Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.nack.failed_op_code.expert SigComp NACK Label 1.12.0 to 2.6.3
sigcomp.nack.pc PC of failed instruction Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.nack.reason Reason Code Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.nack.sha1 SHA-1 Hash of failed message Sequence of bytes 1.0.0 to 2.6.3
sigcomp.nack.state_id State ID (6 - 20 bytes) Sequence of bytes 1.0.0 to 2.6.3
sigcomp.nack.ver NACK Version Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.num_state_create no_of_state_create Unsigned integer, 4 bytes 2.0.0 to 2.6.3
sigcomp.output.length %Output_length Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.output.length.addr %Output_length[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.output.start %Output_start Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.output_value Output value Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.partial.state.identifier Partial state identifier Character string 1.0.0 to 2.6.3
sigcomp.remaining-bytes Remaining SigComp message bytes Unsigned integer, 4 bytes 1.0.0 to 2.6.3
sigcomp.remaining_bytes Remaining bytes Sequence of bytes 2.0.0 to 2.6.3
sigcomp.remaining_sigcomp_message Remaining SigComp message Sequence of bytes 2.0.0 to 2.6.3
sigcomp.req.feedback.loc %Requested feedback location Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.ret.param.loc %Returned parameters location Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.returned.feedback.item Returned_feedback item Sequence of bytes 1.0.0 to 2.6.3
sigcomp.returned.feedback.item.len Returned feedback item length Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.set_hu Set Hu Sequence of bytes 2.0.0 to 2.6.3
sigcomp.sha1_digest SHA1 digest Sequence of bytes 2.0.0 to 2.6.3
sigcomp.sha1buff sha1buff Sequence of bytes 2.0.0 to 2.6.3
sigcomp.starting_to_remove_escape_digits Starting to remove escape digits Label 2.0.0 to 2.6.3
sigcomp.state_value Addr Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.storing_value Storing value Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.t.bit T bit Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.tcp_fragment TCP Fragment Label 2.0.0 to 2.6.3
sigcomp.udvm.addr.destination %Destination[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.addr.j %j[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.addr.length %Length[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.addr.offset %Offset[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.at.address @Address(mem_add_of_inst + D) mod 2^16) Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.bits %Bits Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.byte-code Uploaded UDVM bytecode Label 1.0.0 to 2.6.3
sigcomp.udvm.destination %Destination Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.execution-trace UDVM execution trace Label 1.0.0 to 2.6.3
sigcomp.udvm.instr UDVM instruction code Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.udvm.j %j Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.length %Length Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.lit.bytecode UDVM bytecode Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.udvm.literal-num #n Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.lower.bound %Lower bound Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.multyt.bytecode UDVM bytecode Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.udvm.offset %Offset Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.operand UDVM operand Unsigned integer, 2 bytes 1.0.0 to 1.8.15
sigcomp.udvm.operand.1 $Operand 1[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.operand.2 %Operand 2 Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.operand.2.addr %Operand 2[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.partial.identifier.length %Partial identifier length Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.partial.identifier.start %Partial identifier start Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.position %Position Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.ref.bytecode UDVM bytecode Unsigned integer, 1 byte 1.0.0 to 2.6.3
sigcomp.udvm.ref.destination $Destination[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.start.address %State address Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.start.address.addr %State address[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.start.instr %State instruction Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.start.value %Start value Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.state.begin %State begin Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.state.length %State length Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.state.length.addr %State length[memory address] Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.state.ret.pri %State retention priority Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.uncompressed %Uncompressed Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.upper.bound %Upper bound Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm.value %Value Unsigned integer, 2 bytes 1.0.0 to 2.6.3
sigcomp.udvm_execution_stated UDVM EXECUTION STARTED Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.udvm_instruction UDVM instruction Unsigned integer, 1 byte 2.0.0 to 2.6.3
sigcomp.used_udvm_cycles used_udvm_cycles Unsigned integer, 4 bytes 2.0.0 to 2.6.3
sigcomp.wireshark_udvm_diagnostic Wireshark UDVM diagnostic Unsigned integer, 4 bytes 2.0.0 to 2.6.3
Go Beyond with Riverbed Technology

Riverbed is Wireshark's primary sponsor and provides our funding. They also make great products that fully integrate with Wireshark.

I have a lot of traffic...

ANSWER: SteelCentral™ Packet Analyzer PE
  • • Visually rich, powerful LAN analyzer
  • • Quickly access very large pcap files
  • • Professional, customizable reports
  • • Advanced triggers and alerts
Learn More

Buy Now

No, really, I have a LOT of traffic…

ANSWER: SteelCentral™ AppResponse 11
  • • Full stack analysis – from packets to pages
  • • Rich performance metrics & pre-defined insights for fast problem identification/resolution
  • • Modular, flexible solution for deeply-analyzing network & application performance
Learn More