Display Filter Reference: iWARP Marker Protocol data unit Aligned framing
Protocol field name: iwarp_mpa
Versions: 1.2.0 to 3.4.7
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| iwarp_mpa.bad_length | Bad length | Label | 1.12.0 to 3.4.7 |
| iwarp_mpa.crc | CRC | Unsigned integer, 4 bytes | 1.2.0 to 3.4.7 |
| iwarp_mpa.crc_check | CRC check | Unsigned integer, 4 bytes | 1.2.0 to 3.4.7 |
| iwarp_mpa.crc_flag | CRC flag | Boolean | 1.2.0 to 3.4.7 |
| iwarp_mpa.fpdu | FPDU | Label | 1.2.0 to 3.4.7 |
| iwarp_mpa.key.rep | ID Rep frame | Sequence of bytes | 1.2.0 to 3.4.7 |
| iwarp_mpa.key.req | ID Req frame | Sequence of bytes | 1.2.0 to 3.4.7 |
| iwarp_mpa.marker_flag | Marker flag | Boolean | 1.2.0 to 3.4.7 |
| iwarp_mpa.marker_fpduptr | FPDU back pointer | Unsigned integer, 2 bytes | 1.2.0 to 3.4.7 |
| iwarp_mpa.marker_res | Reserved | Unsigned integer, 2 bytes | 1.2.0 to 3.4.7 |
| iwarp_mpa.markers | Markers | Label | 1.2.0 to 3.4.7 |
| iwarp_mpa.pad | Padding | Sequence of bytes | 1.2.0 to 3.4.7 |
| iwarp_mpa.pdlength | Private data length | Unsigned integer, 2 bytes | 1.2.0 to 3.4.7 |
| iwarp_mpa.privatedata | Private data | Sequence of bytes | 1.2.0 to 3.4.7 |
| iwarp_mpa.rej_flag | Connection rejected flag | Boolean | 1.2.0 to 3.4.7 |
| iwarp_mpa.reject_bit_responder | Reject bit set by Responder | Label | 1.12.0 to 3.4.7 |
| iwarp_mpa.rep | Reply frame header | Label | 1.2.0 to 3.4.7 |
| iwarp_mpa.req | Request frame header | Label | 1.2.0 to 3.4.7 |
| iwarp_mpa.res | Reserved | Unsigned integer, 1 byte | 1.2.0 to 3.4.7 |
| iwarp_mpa.res.not_set0 | Res field is NOT set to zero as required by RFC 5044 | Label | 1.12.0 to 3.4.7 |
| iwarp_mpa.rev | Revision | Unsigned integer, 1 byte | 1.2.0 to 3.4.7 |
| iwarp_mpa.rev.not_set1 | Rev field is NOT set to one as required by RFC 5044 | Label | 1.12.0 to 3.4.7 |
| iwarp_mpa.ulpdulength | ULPDU length | Unsigned integer, 2 bytes | 1.2.0 to 3.4.7 |