Display Filter Reference: FTDI Multi-Protocol Synchronous Serial Engine
Protocol field name: ftdi-mpsse
Versions: 3.4.0 to 3.4.3
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| ftdi-mpsse.bad_command.command | Received invalid command | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.bad_command.error | Error code | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.bits_in | Bits in | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.bits_out | Bits out | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.bytes_in | Bytes in | Sequence of bytes | 3.4.0 to 3.4.3 |
| ftdi-mpsse.bytes_out | Bytes out | Sequence of bytes | 3.4.0 to 3.4.3 |
| ftdi-mpsse.clk_divisor | Divisor | Unsigned integer, 2 bytes | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command | Command | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command.b0 | -ve CLK on write | Boolean | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command.b1 | Mode | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command.b2 | -ve CLK on read | Boolean | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command.b3 | Endianness | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command.b4 | Do write TDI | Boolean | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command.b5 | Do read TDO | Boolean | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command.b6 | Do write TMS | Boolean | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command.b7 | Type | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command.in | Command in | Frame number | 3.4.0 to 3.4.3 |
| ftdi-mpsse.command_with_parameters | Command with parameters | Sequence of bytes | 3.4.0 to 3.4.3 |
| ftdi-mpsse.cpumode_address | Address | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.cpumode_data | Data | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.direction | Direction | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.direction.b0 | Bit 0 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.direction.b1 | Bit 1 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.direction.b2 | Bit 2 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.direction.b3 | Bit 3 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.direction.b4 | Bit 4 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.direction.b5 | Bit 5 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.direction.b6 | Bit 6 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.direction.b7 | Bit 7 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.length | Length | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_high | High Byte | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_high.b0 | Bit 0 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_high.b1 | Bit 1 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_high.b2 | Bit 2 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_high.b3 | Bit 3 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_high.b4 | Bit 4 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_high.b5 | Bit 5 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_high.b6 | Bit 6 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_high.b7 | Bit 7 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_low | Low Byte | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_low.b0 | Bit 0 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_low.b1 | Bit 1 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_low.b2 | Bit 2 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_low.b3 | Bit 3 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_low.b4 | Bit 4 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_low.b5 | Bit 5 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_low.b6 | Bit 6 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.open_drain_enable_low.b7 | Bit 7 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.reassembly_unavailable | Data source dissector does not support reassembly. Dissection will get out of sync. | Label | 3.4.0 to 3.4.3 |
| ftdi-mpsse.response | Command response data | Sequence of bytes | 3.4.0 to 3.4.3 |
| ftdi-mpsse.response.in | Response in | Frame number | 3.4.0 to 3.4.3 |
| ftdi-mpsse.response_without_command | Unable to associate response with command (response without command?) | Label | 3.4.0 to 3.4.3 |
| ftdi-mpsse.skipped_response_data | Skipped response data while looking for Bad Command response | Label | 3.4.0 to 3.4.3 |
| ftdi-mpsse.undecoded | Not dissected yet (report to wireshark.org) | Label | 3.4.0 to 3.4.3 |
| ftdi-mpsse.value | Value | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.value.b0 | Bit 0 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.value.b1 | Bit 1 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.value.b2 | Bit 2 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.value.b3 | Bit 3 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.value.b4 | Bit 4 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.value.b5 | Bit 5 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.value.b6 | Bit 6 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
| ftdi-mpsse.value.b7 | Bit 7 | Unsigned integer, 1 byte | 3.4.0 to 3.4.3 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance