Display Filter Reference: FTDI FT USB
Protocol field name: ftdi-ft
Versions: 3.4.0
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| ftdi-ft.bRequest | Request | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.fragment | Payload fragment | Frame number | 3.4.0 |
| ftdi-ft.fragment.count | Payload fragment count | Unsigned integer, 4 bytes | 3.4.0 |
| ftdi-ft.fragment.error | Payload defragmentation error | Frame number | 3.4.0 |
| ftdi-ft.fragment.multiple_tails | Payload has multiple tails | Boolean | 3.4.0 |
| ftdi-ft.fragment.overlap | Payload fragment overlap | Boolean | 3.4.0 |
| ftdi-ft.fragment.overlap.conflicts | Payload fragment overlapping with conflicting data | Boolean | 3.4.0 |
| ftdi-ft.fragment.too_long_fragment | Payload fragment too long | Boolean | 3.4.0 |
| ftdi-ft.fragments | Payload fragments | Label | 3.4.0 |
| ftdi-ft.hIndex | hIndex | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.hIndex.b0 | RTS/CTS Flow Control | Boolean | 3.4.0 |
| ftdi-ft.hIndex.b1 | DTR/DSR Flow Control | Boolean | 3.4.0 |
| ftdi-ft.hIndex.b2 | XON/XOFF Flow Control | Boolean | 3.4.0 |
| ftdi-ft.hValue | hValue | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.hValue.b0 | en DTR for writing | Boolean | 3.4.0 |
| ftdi-ft.hValue.b1 | en RTS for writing | Boolean | 3.4.0 |
| ftdi-ft.hValue.b4 | Stop Bits | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.hValue.b6 | Break Bit | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.hValue.parity | Parity | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.if_a_rx_payload | A RX payload | Sequence of bytes | 3.4.0 |
| ftdi-ft.if_a_tx_payload | A TX payload | Sequence of bytes | 3.4.0 |
| ftdi-ft.if_b_rx_payload | B RX payload | Sequence of bytes | 3.4.0 |
| ftdi-ft.if_b_tx_payload | B TX payload | Sequence of bytes | 3.4.0 |
| ftdi-ft.if_c_rx_payload | C RX payload | Sequence of bytes | 3.4.0 |
| ftdi-ft.if_c_tx_payload | C TX payload | Sequence of bytes | 3.4.0 |
| ftdi-ft.if_d_rx_payload | D RX payload | Sequence of bytes | 3.4.0 |
| ftdi-ft.if_d_tx_payload | D TX payload | Sequence of bytes | 3.4.0 |
| ftdi-ft.latency_time | Latency Time | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.lIndex | lIndex | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.lIndex.b0 | Baud High | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.line_status | Line Status | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.line_status.b1 | Receive Overflow Error | Boolean | 3.4.0 |
| ftdi-ft.line_status.b2 | Parity Error | Boolean | 3.4.0 |
| ftdi-ft.line_status.b3 | Framing Error | Boolean | 3.4.0 |
| ftdi-ft.line_status.b4 | Break Received | Boolean | 3.4.0 |
| ftdi-ft.line_status.b5 | Transmitter Holding Register Empty | Boolean | 3.4.0 |
| ftdi-ft.line_status.b6 | Transmitter Empty | Boolean | 3.4.0 |
| ftdi-ft.lValue | lValue | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.lValue.b0 | DTR Active | Boolean | 3.4.0 |
| ftdi-ft.lValue.b1 | RTS Active | Boolean | 3.4.0 |
| ftdi-ft.modem_status | Modem Status | Unsigned integer, 1 byte | 3.4.0 |
| ftdi-ft.modem_status.b0 | Full Speed 64 byte MAX packet | Boolean | 3.4.0 |
| ftdi-ft.modem_status.b1 | High Speed 512 byte MAX packet | Boolean | 3.4.0 |
| ftdi-ft.modem_status.b4 | CTS | Boolean | 3.4.0 |
| ftdi-ft.modem_status.b5 | DSR | Boolean | 3.4.0 |
| ftdi-ft.modem_status.b6 | RI | Boolean | 3.4.0 |
| ftdi-ft.modem_status.b7 | DCD | Boolean | 3.4.0 |
| ftdi-ft.reassembled.in | Payload reassembled in | Frame number | 3.4.0 |
| ftdi-ft.reassembled.length | Payload reassembled length | Unsigned integer, 4 bytes | 3.4.0 |
| ftdi-ft.undecoded | Not dissected yet (report to wireshark.org) | Label | 3.4.0 |
| ftdi-ft.wLength | wLength | Unsigned integer, 2 bytes | 3.4.0 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance