Display Filter Reference: Fibre Channel Protocol for SCSI
Protocol field name: fcp
Versions: 1.0.0 to 3.4.2
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| fcp.addlcdblen | Additional CDB Length | Unsigned integer, 1 byte | 1.0.0 to 3.4.2 |
| fcp.bidir_dl | FCP_BIDIRECTIONAL_READ_DL | Unsigned integer, 4 bytes | 1.0.0 to 3.4.2 |
| fcp.bidir_resid | Bidirectional Read Resid | Unsigned integer, 4 bytes | 1.0.0 to 3.4.2 |
| fcp.burstlen | Burst Length | Unsigned integer, 4 bytes | 1.0.0 to 3.4.2 |
| fcp.crn | Command Ref Num | Unsigned integer, 1 byte | 1.0.0 to 3.4.2 |
| fcp.data_ro | FCP_DATA_RO | Unsigned integer, 4 bytes | 1.0.0 to 3.4.2 |
| fcp.dl | FCP_DL | Unsigned integer, 4 bytes | 1.0.0 to 3.4.2 |
| fcp.els.op | Opcode | Unsigned integer, 1 byte | 1.4.0 to 1.8.15, 2.0.0 to 3.4.2 |
| fcp.els.srr.ox_id | OX_ID | Unsigned integer, 2 bytes | 1.4.0 to 3.4.2 |
| fcp.els.srr.r_ctl | R_CTL | Unsigned integer, 1 byte | 1.4.0 to 1.8.15 |
| fcp.els.srr.rx_id | RX_ID | Unsigned integer, 2 bytes | 1.4.0 to 3.4.2 |
| fcp.lun | LUN | Unsigned integer, 1 byte | 1.0.0 to 3.4.2 |
| fcp.mgmt.flags.abort_task_set | Abort Task Set | Boolean | 1.0.0 to 3.4.2 |
| fcp.mgmt.flags.clear_aca | Clear ACA | Boolean | 1.0.0 to 3.4.2 |
| fcp.mgmt.flags.clear_task_set | Clear Task Set | Boolean | 1.0.0 to 3.4.2 |
| fcp.mgmt.flags.lu_reset | LU Reset | Boolean | 1.0.0 to 3.4.2 |
| fcp.mgmt.flags.obsolete | Obsolete | Boolean | 1.0.0 to 3.4.2 |
| fcp.mgmt.flags.rsvd | Rsvd | Boolean | 1.0.0 to 3.4.2 |
| fcp.mgmt.flags.target_reset | Target Reset | Boolean | 1.0.0 to 3.4.2 |
| fcp.multilun | Multi-Level LUN | Sequence of bytes | 1.0.0 to 3.4.2 |
| fcp.r_ctl | R_CTL | Unsigned integer, 1 byte | 2.0.0 to 3.4.2 |
| fcp.rddata | RDDATA | Boolean | 1.0.0 to 3.4.2 |
| fcp.request_in | Request In | Frame number | 1.0.0 to 3.4.2 |
| fcp.resid | FCP_RESID | Unsigned integer, 4 bytes | 1.0.0 to 3.4.2 |
| fcp.response_in | Response In | Frame number | 1.0.0 to 3.4.2 |
| fcp.rsp.flags.bidi | Bidi Rsp | Boolean | 1.0.0 to 3.4.2 |
| fcp.rsp.flags.bidi_rro | Bidi Read Resid Over | Boolean | 1.0.0 to 3.4.2 |
| fcp.rsp.flags.bidi_rru | Bidi Read Resid Under | Boolean | 1.0.0 to 3.4.2 |
| fcp.rsp.flags.conf_req | Conf Req | Boolean | 1.0.0 to 3.4.2 |
| fcp.rsp.flags.res_vld | RES Vld | Boolean | 1.0.0 to 3.4.2 |
| fcp.rsp.flags.resid_over | Resid Over | Boolean | 1.0.0 to 3.4.2 |
| fcp.rsp.flags.resid_under | Resid Under | Boolean | 1.0.0 to 3.4.2 |
| fcp.rsp.flags.sns_vld | SNS Vld | Boolean | 1.0.0 to 3.4.2 |
| fcp.rsp.retry_delay_timer | Retry Delay Timer | Unsigned integer, 2 bytes | 1.0.0 to 3.4.2 |
| fcp.rspcode | RSP_CODE | Unsigned integer, 1 byte | 1.0.0 to 3.4.2 |
| fcp.rspflags | FCP_RSP Flags | Unsigned integer, 1 byte | 1.0.0 to 3.4.2 |
| fcp.rsplen | FCP_RSP_LEN | Unsigned integer, 4 bytes | 1.0.0 to 3.4.2 |
| fcp.snslen | FCP_SNS_LEN | Unsigned integer, 4 bytes | 1.0.0 to 3.4.2 |
| fcp.status | SCSI Status | Unsigned integer, 1 byte | 1.0.0 to 3.4.2 |
| fcp.taskattr | Task Attribute | Unsigned integer, 1 byte | 1.0.0 to 3.4.2 |
| fcp.taskmgmt | Task Management Flags | Unsigned integer, 1 byte | 1.0.0 to 3.4.2 |
| fcp.time | Time from FCP_CMND | Time offset | 1.0.0 to 3.4.2 |
| fcp.type | Field to branch off to SCSI | Unsigned integer, 1 byte | 1.0.0 to 1.10.14 |
| fcp.wrdata | WRDATA | Boolean | 1.0.0 to 3.4.2 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance