Display Filter Reference: EBHSCR Protocol
Protocol field name: ebhscr
Versions: 3.2.0 to 4.0.3
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| ebhscr.can.asts | CAN protocol status availability | Unsigned integer (2 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.can.boff | CAN Bus Off state | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.can.cel | Can Error Logging Counter | Unsigned integer (8 bytes) | 3.6.0 to 4.0.3 |
| ebhscr.can.dlec | CAN Data phase of CAN FD frame (with BRS flag set) last error code. | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.can.errp | CAN Counters reached Error passive limit | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.can.errw | CAN Counters reached Error warning limit | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.can.LEC | CAN Last error code | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.can.rec | CAN Receive Error Counter | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.can.rsv | Reserved Flags | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.can.tec | CAN Transmit Error Counter | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.can.type | CAN FD flag | Unsigned integer (2 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.channel | Channel | Unsigned integer (1 byte) | 3.2.0 to 4.0.3 |
| ebhscr.dio.jump_occ | Time jump occurred | Boolean | 3.6.0 to 4.0.3 |
| ebhscr.dio.ofw_mon | Overflow in the monitoring unit | Boolean | 3.6.0 to 4.0.3 |
| ebhscr.dio.rsv | Reserved Flags | Boolean | 3.6.0 to 4.0.3 |
| ebhscr.dio.valtype | Digital IO value type | Unsigned integer (8 bytes) | 3.6.0 to 4.0.3 |
| ebhscr.ece | Ethernet CRC Error | Boolean | 3.2.0 to 3.2.18 |
| ebhscr.ehfoe | Header FIFO Overflow Error | Boolean | 3.2.0 to 3.2.18 |
| ebhscr.ejbr | Jabber | Boolean | 3.2.0 to 3.2.18 |
| ebhscr.elud | Link Up or Down | Unsigned integer (4 bytes) | 3.2.0 to 3.2.18 |
| ebhscr.emiifoe | Media-independent interface FIFO Overflow Error | Boolean | 3.2.0 to 3.2.18 |
| ebhscr.ems | Master or Slave (if supported) | Unsigned integer (4 bytes) | 3.2.0 to 3.2.18 |
| ebhscr.epch | Polarity Change | Boolean | 3.2.0 to 3.2.18 |
| ebhscr.epfoe | Payload FIFO Overflow Error | Boolean | 3.2.0 to 3.2.18 |
| ebhscr.ephy | Ethernet phy | Unsigned integer (4 bytes) | 3.2.0 to 3.2.18 |
| ebhscr.erde | Receiver Decoder Error | Boolean | 3.2.0 to 3.2.18 |
| ebhscr.ese | Symbol Error | Boolean | 3.2.0 to 3.2.18 |
| ebhscr.espd | Ethernet speed | Unsigned integer (4 bytes) | 3.2.0 to 3.2.18 |
| ebhscr.eth.crc | Ethernet CRC Error | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.fcsua | FCS unavailable | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.eth.flsc | False Carrier | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.hfoe | Header FIFO Overflow Error | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.jbr | Jabber | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.ltcls | If value 1 then a Late collision was detected. | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.lud | Link Up or Down | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.eth.miifoe | Media-independent interface FIFO Overflow Error | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.ms | Master or Slave (if supported) | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.eth.pche | Polarity Change | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.pfoe | Payload FIFO Overflow Error | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.rde | Receiver Decoder Error | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.rsv | Reserved Flags | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.rsvd | Reserved | Boolean | 3.6.0 to 4.0.3 |
| ebhscr.eth.rtrlmt | If value 1 then the Retransmission Limit was reached | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.rxtrc | Truncation | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.se | Symbol Error | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.spd | Ethernet speed | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.eth.trc | If value 1 then a Truncation occurred. The frame is sent truncated. | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.trdis | Capture: Transmission Discarded Error, Replay: Start Frame Separation Bit | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.eth.trudr | If value 1 then a Transmitter Underrun occurred. | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.eth.wfsb | Wait Frame Separation Bit | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.bsserr | Byte start sequence error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.cha | Channel A | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.chb | Channel B | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.coderr | Coding error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.ctrl | Controller id | Unsigned integer (1 byte) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.fcc | Cycle counter of following cycle | Unsigned integer (1 byte) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.fcrcerr | Frame CRC error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.feserr | Frame end sequence error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests | Frame status | Unsigned integer (2 bytes) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.brc | Byte Received Counter | Unsigned integer (2 bytes) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.bviol | Boundary violation | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.ccerr | Cycle counter error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.cp | Communication cycle part | Unsigned integer (2 bytes) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.fiderr | Frame ID error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.nerr | Null frame error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.nitviol | NIT violation | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.pcd | Prolonged channel idle detection | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.soverr | Slot overbooked error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.splerr | Static payload length error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.sserr | Sync or startup error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.swviol | Symbol Window violation | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.framests.syncerr | Sync and/or startup bit wrongly set | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.fsserr | Frame start sequence error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.hcrcerr | Header CRC error | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.jump_occ | Time jump occurred | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.pkttype | FlexRay packet type | Unsigned integer (2 bytes) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.pocstate | Protocol operation control state | Unsigned integer (1 byte) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.scc | Supercycle counter | Unsigned integer (4 bytes) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.slotinfo | Slot information | Unsigned integer (2 bytes) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.slotinfo.aci | Additional communication indicator | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.slotinfo.ced | Content error detected | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.slotinfo.sbv | Slot boundary violation | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.slotinfo.sed | Syntax error detected | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.slotinfo.sid | Slot ID | Unsigned integer (2 bytes) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.slotinfo.vfr | Valid Frame Received | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.slsts | Symbol length and status | Unsigned integer (1 byte) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.slsts.sl | Symbol length in units of bit cells | Unsigned integer (1 byte) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.slsts.syerr | The low phase was too long | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.sync | If value 1 then FlexRay cluster is sync (only valid if bit 0 = 1). | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.flexray.syncmon | Synchronous monitoring packet | Unsigned integer (2 bytes) | 4.0.0 to 4.0.3 |
| ebhscr.flexray.tssviol | TSS violation | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.frame_header | Frame Header is malformed | Label | 3.2.0 to 4.0.3 |
| ebhscr.hdr | Packet header | Unsigned integer (4 bytes) | 3.2.0 to 4.0.3 |
| ebhscr.len | Length | Unsigned integer (4 bytes) | 3.2.0 to 4.0.3 |
| ebhscr.lin.bitrsv | Reserved bit | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.chk | CHK - Checksum is invalid | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.clchksum | LIN 1.3 Classic Checksum received | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.dat | DAT - Too many data bytes received | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.emp | EMP - Break and Sync received, but no further data | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.enchksum | LIN 2.0 Enhanced Checksum received | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.par | PAR - Received parity does not match calculated parity | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.payload | Payload | Byte sequence | 4.0.0 to 4.0.3 |
| ebhscr.lin.payload.checksum | Checksum | Unsigned integer (1 byte) | 4.0.0 to 4.0.3 |
| ebhscr.lin.payload.data | Data | Byte sequence | 4.0.0 to 4.0.3 |
| ebhscr.lin.payload.id | LIN identifier | Unsigned integer (1 byte) | 4.0.0 to 4.0.3 |
| ebhscr.lin.payload.id_parity0 | LIN identifier parity bit 0 | Unsigned integer (1 byte) | 4.0.0 to 4.0.3 |
| ebhscr.lin.payload.id_parity1 | LIN identifier parity bit 1 | Unsigned integer (1 byte) | 4.0.0 to 4.0.3 |
| ebhscr.lin.payload.pid | LIN protected identifier | Unsigned integer (1 byte) | 4.0.0 to 4.0.3 |
| ebhscr.lin.res | RES - No response detected after LIN header | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.rsv | Reserved | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.sta | STA - Expected start bit, but detected recessive bus level | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.sto | STO - Expected stop bit, but detected recessive bus level | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.syn | SYN - Received synchronization field is not 0x55 | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.timejmp | Time jump occurred near the edge and thus the timestamp was estimated | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.wakeup | LIN Wake-Up Packet was received | Boolean | 4.0.0 to 4.0.3 |
| ebhscr.lin.wakeup.length | Wake-Up signal low phase length in us | Unsigned integer (8 bytes) | 4.0.0 to 4.0.3 |
| ebhscr.mjr | Major number | Unsigned integer (1 byte) | 3.2.0 to 4.0.3 |
| ebhscr.mjrhdr | Major number specific header | Unsigned integer (8 bytes) | 3.2.0 to 4.0.3 |
| ebhscr.mjrhdr.unused | Major number specific header [Unused] | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.slot | Slot | Unsigned integer (1 byte) | 3.2.0 to 4.0.3 |
| ebhscr.stpt | Stop timestamp | Unsigned integer (8 bytes) | 3.2.0 to 4.0.3 |
| ebhscr.strt | Start timestamp | Unsigned integer (8 bytes) | 3.2.0 to 4.0.3 |
| ebhscr.sts | Status | Unsigned integer (2 bytes) | 3.2.0 to 4.0.3 |
| ebhscr.sts.err.status | Status Flag is set | Label | 3.4.0 to 4.0.3 |
| ebhscr.sts.info.status | Status Flag is set | Label | 3.4.0 to 4.0.3 |
| ebhscr.sts.unused | Status [Unused] | Unsigned integer (4 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.ts.leap | UTC leap-seconds | Unsigned integer (2 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.ts.locv | Last offset change in ns valid (byte 8-15) | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.ts.lstjmp | Nano seconds last jump | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.ts.lstoff | Last offset change in nano seconds | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.ts.nsljv | Nano seconds last jump valid (byte 16-23) | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.ts.off | Time offset in nanoseconds | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.ts.ssv | Sync state valid (byte 26-27) | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.ts.syn | Sync state | Unsigned integer (2 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.ts.tov | Time offset in ns valid (byte 0-7) | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.ts.tsrc | Time source | Unsigned integer (8 bytes) | 3.4.0 to 4.0.3 |
| ebhscr.ts.utclsv | UTC leap seconds valid (byte 24-25) | Boolean | 3.4.0 to 4.0.3 |
| ebhscr.ver | Version | Unsigned integer (2 bytes) | 3.2.0 to 4.0.3 |