Wireshark-users: Re: [Wireshark-users] speex RTP

From: "RUOFF LARS" <Lars.Ruoff@xxxxxxxxxxxxxxxxxx>
Date: Thu, 4 Feb 2010 17:16:39 +0100

Hi,
That's probably because Wireshark can't determine the sampling rate.
Speex uses a dynamic payload type.
So Wireshark needs to have signaling info (SIP/SDP, H.323, ...) in your trace to figure out the sampling rate. Do you have this?

To Dev people: Actually we *don't need* the sampling rate in order to calcualte packet delta!
But in practice it seems we don't calculate it if we don't have a sampling rate. => could be fixed.

Regards,
Lars



________________________________

	From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Koleszár Ádám
	Sent: jeudi 4 février 2010 11:46
	To: wireshark-users@xxxxxxxxxxxxx
	Subject: [Wireshark-users] speex RTP
	
	
	Hi all!
	
	I have a problem with rtp stream analyzer, i' m useing speex codec 8000hz sample rate and vbr. I see "0" in delta column every rows instead of the real delta values. Everything fine with PCMA, g711, g729, gsm... but speex.
	
	I tried the 1.2.2 and 1.2.6 and 1.3.2 dev versions... Same result, no delta values
	
	Can anybody help me with this problem?
	
	Br,
	Adam 
	
________________________________

	Hotmail: Megbízható e-mail szolgáltatás a hatékony LEVÉLSZEMÉT elleni védelem használatával. Regisztráljon most! <https://signup.live.com/signup.aspx?id=60969>