Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-users: Re: [Wireshark-users] FC Malformed packets

Date: Wed, 18 Nov 2009 16:46:13 -0500

I believe I read an article with a similar issue involving a router, it was ether a bug or bad ram (more I think about it the more I think it was bad ram)

Does a MAC address show up in the capture, might give you a direction on what device to go smack.

Thanks

tim

 

From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of George Peaslee
Sent: Wednesday, November 18, 2009 4:41 PM
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] FC Malformed packets

 

Actually, I have seen that. It was a problem the device I was capturing. It used a template to build the IP packet and the template wasn't getting filled in properly.

----- Original Message -----

From: Wright, John

Sent: Wednesday, November 18, 2009 3:32 PM

Subject: [Wireshark-users] FC Malformed packets

 

Hello

Anyone ever see this before. Nearly 25 percent of all packets that I capture from my switches says it is:

 FC malformed packet

There is no source addr or dest addr. All zeros

 


___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe