Hello again I hope i reply proper
>> I am using voipdiscount and i try to playback the call with wireshark,
>> During the capture i only see udp packets nothing to establish a sip
>> connection
>
> Perhaps the capture started after the call was set up?
No. The capture starts before i launch the software.
Did any of the UDP packets appear to contain SIP requests or replies?
Were there any TCP segments containing SIP requests or replies?
Nope.
The UDP packets might be RTP; try either decoding them as RTP or
turning on the "Try to decode RTP outside of conversations" preference
for RTP
if i decode i see unknown RTP version 1. If i go to
Telephony->RTP->show all Streams wireshark detects a stream with
800packets, but no i don't see any button for player. If i click
analyze i see details of the stream but not a player button
2009/7/12 <wireshark-users-request@xxxxxxxxxxxxx>:
> Send Wireshark-users mailing list submissions to
> wireshark-users@xxxxxxxxxxxxx
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://wireshark.org/mailman/listinfo/wireshark-users
> or, via email, send a message with subject or body 'help' to
> wireshark-users-request@xxxxxxxxxxxxx
>
> You can reach the person managing the list at
> wireshark-users-owner@xxxxxxxxxxxxx
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Wireshark-users digest..."
>
>
> Today's Topics:
>
> 1. Re: Wireshark-users Digest, Vol 38, Issue 17 (????????)
> 2. Re: Wireshark-users Digest, Vol 38, Issue 17 (Guy Harris)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 12 Jul 2009 00:15:26 +0300
> From: ???????? <firewallgr@xxxxxxxxx>
> Subject: Re: [Wireshark-users] Wireshark-users Digest, Vol 38, Issue
> 17
> To: wireshark-users@xxxxxxxxxxxxx
> Message-ID:
> <f0a9ce1c0907111415i37302b8di1e621bbced2a34f@xxxxxxxxxxxxxx>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hello,
>
> I am using voipdiscount and i try to playback the call with wireshark,
> During the capture i only see udp packets nothing to establish a sip
> connection and if i go to the voip calls it cannot detect any. I tried
> to decode the udp packets as sip but no luck.
> I thought i should be able to listen the call through the voip player
> of wireshark.
>
> Any help
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 11 Jul 2009 15:02:29 -0700
> From: Guy Harris <guy@xxxxxxxxxxxx>
> Subject: Re: [Wireshark-users] Wireshark-users Digest, Vol 38, Issue
> 17
> To: Community support list for Wireshark
> <wireshark-users@xxxxxxxxxxxxx>
> Message-ID: <CD9934DA-8F65-43D7-B1FC-149DE89EC3BC@xxxxxxxxxxxx>
> Content-Type: text/plain; charset=UTF-8; format=flowed; delsp=yes
>
>
> On Jul 11, 2009, at 2:15 PM, ???????? wrote:
>
>> I am using voipdiscount and i try to playback the call with wireshark,
>> During the capture i only see udp packets nothing to establish a sip
>> connection
>
> Perhaps the capture started after the call was set up?
>
>> and if i go to the voip calls it cannot detect any. I tried
>> to decode the udp packets as sip but no luck.
>
> Did any of the UDP packets appear to contain SIP requests or replies?
> Were there any TCP segments containing SIP requests or replies?
>
>> I thought i should be able to listen the call through the voip player
>> of wireshark.
>
> The UDP packets might be RTP; try either decoding them as RTP or
> turning on the "Try to decode RTP outside of conversations" preference
> for RTP.
>
> If there are RTP packets when you do that, try using the items in the
> RTP statistics menus; the RTP player might be able to play back the
> RTP streams.
>
> ------------------------------
>
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> https://wireshark.org/mailman/listinfo/wireshark-users
>
>
> End of Wireshark-users Digest, Vol 38, Issue 19
> ***********************************************
>
