Riverbed Cascade Pilot Personal Edition: Take Wireshark to the Next Level - Advanced Triggers and Alerts; Web and VoIP Analytics; Long-Term Trending and Forensics; Deep Packet Analysis with Wireshark

Wireshark-users: Re: [Wireshark-users] Port Monitoring

Date Index Thread Index Other Months All Mailing Lists

Date Prev Date Next Thread Prev Thread Next

From: Rohan Solanki <solanki.rohan@xxxxxxxxx>
Date: Tue, 5 May 2009 07:42:39 -0700

Thanks Guy and Jack for the reply,
I wanted to know this only. If any queries ill post it.

Regards,
Rohan

On Mon, May 4, 2009 at 8:57 AM, Jack Jackson <jack@xxxxxxxxxxxxxxx> wrote:

At 10:31 PM 5/3/2009, Rohan Solanki wrote:
>Hi all,
> From earlier posts i found that you can monitor a router by configuring
> it or through a switch using port monitoring. In port monitoring a
> switch, how can i configure wireshark to monitor a specific port?

You don't. You configure the switch to monitor to a port, and you plug the
computer running WireShark into that port.

___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe

References:
- [Wireshark-users] Port Monitoring
  - From: Rohan Solanki
- Re: [Wireshark-users] Port Monitoring
  - From: Jack Jackson

Prev by Date: [Wireshark-users] TNAPI
Next by Date: [Wireshark-users] 80211 capture
Previous by thread: Re: [Wireshark-users] Port Monitoring
Next by thread: [Wireshark-users] T38 Capture
Index(es):
- Date
- Thread