Wireshark · Wireshark-users: Re: [Wireshark-users] What is the maximum data rate supported bywireshark

["Steve Anthony" <steveranthony@xxxxxxxxx>]

HOw the helll do I get outta this subscription.... ?????????????????/

On Fri, Apr 4, 2008 at 11:35 AM, Tapas Chatterjee <tapas.chatterjee@xxxxxxxxxxx> wrote:

Well .But do you observed any packet drop during capturing.
with regards,
Tapas Chatterjee




Alexander Pilugin <a_pilugin@xxxxxxx>

Alexander Pilugin <a_pilugin@xxxxxxx>
Sent by: wireshark-users-bounces@xxxxxxxxxxxxx

04/03/2008 07:19 PM



Please respond to
Alexander Pilugin <a_pilugin@xxxxxxx>; Please respond to
Community support list for Wireshark <wireshark-users@xxxxxxxxxxxxx>

To	Community support list for Wireshark <wireshark-users@xxxxxxxxxxxxx>
cc
Subject	Re: [Wireshark-users]What is the maximum data rate supported bywireshark

I used wireshark with average load 40-50 Mbits and max 80-90. It works well! PC: CPU Intel 2.8 and core duo 2.4 and 2 GB RAM.

-----Original Message-----
From: Tapas Chatterjee <tapas.chatterjee@xxxxxxxxxxx>
To: wireshark-users@xxxxxxxxxxxxx
Date: 03-Apr-2008 18:33:48 ZE5B
Subject: [Wireshark-users] What is the maximum data rate supported bywireshark

>
>
> Hi,
> My System configuration is given below:
>
>    PC, Intel(R) Xeon(TM) CPU 3.00 GHz, Dual CPU Dual core,3 GB RAM
>    Linux OS (RHEL 4.0)
>    Ethernet NIC adapter (10/100 Mb/s)
> And now my queries are:
> 1) Can wireshark support the data rate 70- 80 Mbps?
> 2) What is the maximum data rate supported by wireshark?
>
> Note :Assume that  wireshark is run on single system where no other process
> is running.
>
> with regards,
> Tapas Chatterjee
>
>
>
> ***********************  Aricent-Unclassified   ***********************
>
>    "DISCLAIMER: This message is proprietary to Aricent  and is intended
>    solely for the use of
>    the individual to whom it is addressed. It may contain privileged or
>    confidential information and should not be
>    circulated or used for any purpose other than for what it is intended.
>    If you have received this message in error,
>    please notify the originator immediately. If you are not the intended
>    recipient, you are notified that you are strictly
>    prohibited from using, copying, altering, or disclosing the contents of
>    this message. Aricent accepts no responsibility for
>    loss or damage arising from the use of the information transmitted by
>    this email including damage from virus."
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-users
>

Best regards, Pilugin Alexander!
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users



*********************** Aricent-Unclassified ***********************

"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of
the individual to whom it is addressed. It may contain privileged or confidential information and should not be
circulated or used for any purpose other than for what it is intended. If you have received this message in error,
please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly
prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for
loss or damage arising from the use of the information transmitted by this email including damage from virus."

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users