Wireshark-users: Re: [Wireshark-users] Decoding MMS/COTP/TPKT/TCP

From: "Luis Ontanon" <luis.ontanon@xxxxxxxxx>
Date: Thu, 5 Apr 2007 17:10:02 +0200

As a profane I think, wireshark must see the setup of the COTP session
in order to determine what's the payload.

On 4/5/07, Kunjarteer <kunjarteer@xxxxxxxxx> wrote:

Hi,

 I'm having problems getting MMS to decode properly when its transported
over the COTP/TPKT/TCP protocol stack. The 'data' in the COTP payload is
never decoded. I've tried using 'decode as' but MMS does not appear on the
protocol list even thought it is enabled. MMS is decoded fine with other
traffic I have which is over OSI presentation layers. Is there a way I can
enable the dissectors to decode MMS when its sent directly over COTP?

Thank you,

Kunjar Singh

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users

--
This information is top security. When you have read it, destroy yourself.
-- Marshall McLuhan