Hi,
Now when we have custom columns could we get rid of
some of the “fixed” columns?
It seems to me that some are not of a general
interest.
This is the column enum:
COL_8021Q_VLAN_ID, /* 0)
802.1Q vlan ID */
COL_ABS_DATE_TIME, /* 1) Absolute date and time */
COL_ABS_TIME,
/* 2) Absolute time */
COL_CIRCUIT_ID,
/* 3) Circuit ID */
COL_DSTIDX,
/* 4) Dst port idx - Cisco
MDS-specific */
COL_SRCIDX,
/* 5) Src port idx - Cisco
MDS-specific */
COL_VSAN,
/* 6) VSAN - Cisco MDS-specific */
COL_CUMULATIVE_BYTES,
/* 7) Cumulative number of bytes */
COL_CUSTOM,
/* 8) Custom column (any filter
name's contents) */
COL_DCE_CALL,
/* 9) DCE/RPC connection oriented
call id OR datagram sequence number */
COL_DCE_CTX,
/* 10) DCE/RPC connection oriented
context id */
COL_DELTA_TIME,
/* 11) Delta time */
COL_DELTA_CONV_TIME,/* 12) Delta time to last frame in
conversation */
COL_DELTA_TIME_DIS,
/* 13) Delta time displayed*/
COL_RES_DST,
/* 14) Resolved dest */
COL_UNRES_DST,
/* 15) Unresolved dest */
COL_RES_DST_PORT,
/* 16) Resolved dest port */
COL_UNRES_DST_PORT,
/* 17) Unresolved dest port */
COL_DEF_DST,
/* 18) Destination address */
COL_DEF_DST_PORT,
/* 19) Destination port */
COL_EXPERT, /* 20) Expert Info */
COL_IF_DIR, /* 21) FW-1 monitor interface/direction */
COL_OXID,
/* 22) Fibre Channel OXID */
COL_RXID,
/* 23) Fibre Channel RXID */
COL_FR_DLCI,
/* 24) Frame Relay DLCI */
COL_FREQ_CHAN,
/* 25) IEEE 802.11 (and WiMax?) -
Channel */
COL_BSSGP_TLLI,
/* 26) GPRS BSSGP IE TLLI */
COL_HPUX_DEVID,
/* 27) HP-UX Nettl Device ID */
COL_HPUX_SUBSYS, /*
28) HP-UX Nettl Subsystem */
COL_DEF_DL_DST,
/* 29) Data link layer dest address
*/
COL_DEF_DL_SRC,
/* 30) Data link layer source
address */
COL_RES_DL_DST,
/* 31) Resolved DL dest */
COL_UNRES_DL_DST,
/* 32) Unresolved DL dest */
COL_RES_DL_SRC,
/* 33) Resolved DL source */
COL_UNRES_DL_SRC,
/* 34) Unresolved DL source */
COL_RSSI,
/* 35) IEEE 802.11 - received
signal strength */
COL_TX_RATE,
/* 36) IEEE 802.11 - TX rate in
Mbps */
COL_DSCP_VALUE,
/* 37) IP DSCP Value */
COL_INFO,
/* 38) Description */
COL_COS_VALUE, /* 39) L2 COS Value */
COL_RES_NET_DST,
/* 40) Resolved net dest */
COL_UNRES_NET_DST,
/* 41) Unresolved net dest */
COL_RES_NET_SRC,
/* 42) Resolved net source */
COL_UNRES_NET_SRC,
/* 43) Unresolved net source */
COL_DEF_NET_DST,
/* 44) Network layer dest address
*/
COL_DEF_NET_SRC,
/* 45) Network layer source address
*/
COL_NUMBER,
/* 46) Packet list item number */
COL_PACKET_LENGTH,
/* 47) Packet length in bytes */
COL_PROTOCOL,
/* 48) Protocol */
COL_REL_TIME, /* 49) Relative time */
COL_REL_CONV_TIME,
/* 50) Relative time to beginning
of conversation */
COL_DEF_SRC,
/* 51) Source address */
COL_DEF_SRC_PORT,
/* 52) Source port */
COL_RES_SRC,
/* 53) Resolved source */
COL_UNRES_SRC,
/* 54) Unresolved source */
COL_RES_SRC_PORT,
/* 55) Resolved source port */
COL_UNRES_SRC_PORT,
/* 56) Unresolved source port */
COL_TEI,
/* 57) Q.921 TEI */
COL_CLS_TIME, /* 58) Command line-specified time (default relative) */
NUM_COL_FMTS
/*
59) Should always be last */
Could some be retired? If so suggestions would be
welcome J
Regards
Anders
