Wireshark · Wireshark-dev: Re: [Wireshark-dev] Issue loading a new plugin

["James Gallogly" <jgallogly@xxxxxxxxxxxxxxx>]

Oliver,

	Perfect! That did the trick. Thanks for the help!

Jim
-----Original Message-----
From: wireshark-dev-bounces@xxxxxxxxxxxxx
[mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of wsgd
Sent: Friday, January 30, 2009 4:20 PM
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] Issue loading a new plugin

Hello

"Couldn't load module C:\Program Files\Wireshark\plugins\1.0.5\ccs.dll:

The Specified module could not be found."

is the error window I have if I do not include the manifest inside the
dll.

To include the manifest inside the dll :
mt.exe -manifest <dll_name>.dll.manifest -outputresource:<dll_name>.dll;2

Plugin works for me.
dissector with C++ inside,
production : wireshark 1.0.3, Vista, Visual C++ 2005 EE
works on :
- 1.0.5 standard installation (Vista and XP)
- 1.0.3 standard installation (XP)
- 1.0.3 own build installation (Vista and XP)



Olivier


James Gallogly a �crit :
>
> UFLF,
>
> Copying the Microsoft CRT dlls to the Wireshark directory (which as it
> turns out is recommend in the dev guide section 4.4.6.4) yields the
> following behavior.
>
> Again my plug-in works fine so long as I build Wireshark from source.
> Has anyone built a plugin with VS 2005 or greater and used that dll
> with the official Wireshark built release? Or does everyone just build
> there own Wireshark version?
>
> Thanks for thelp,
>
> Jim
>
> -----Original Message-----
> From: wireshark-dev-bounces@xxxxxxxxxxxxx
> [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of James Gallogly
> Sent: Thursday, January 29, 2009 9:38 AM
> To: 'Developer support list for Wireshark'
> Subject: Re: [Wireshark-dev] Issue loading a new plugin
>
> ULFL,
>
> Thanks for help and fast response. The guide was very useful in
>
> getting a build together. Building all of wireshark and executing that
>
> with my plugin in place works fine. I only have an issue when I
"install"
>
> my plugin into the official release build.
>
> So currently my only tests have been on my development machine. Your
>
> correct the make file has no mt.exe reference. Copying the manifest into
>
> the plugins location doesn�t seem to have an affect. I even installed
the
>
> c-runtime distrubtion files on my machine in case something was strange
>
> there. Again no change. Later I will try your suggestion of copying the
>
> runtime dlls just to see if the behavior changes.
>
> Thanks for the help,
>
> Jim
>
> -----Original Message-----
>
> From: wireshark-dev-bounces@xxxxxxxxxxxxx
>
> [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Ulf Lamping
>
> Sent: Wednesday, January 28, 2009 8:12 PM
>
> To: Developer support list for Wireshark
>
> Subject: Re: [Wireshark-dev] Issue loading a new plugin
>
> Heude Pascal schrieb:
>
> > Hello Jim,
>
> >
>
> > Do you try to build the whole wireshark or only to build your dll ?
>
> > I had this problem on some windows version and I solved it by building
>
> > the whole wireshark. But I still do not know why !
>
> >
>
> > Pascal
>
> >
>
> > James Gallogly a �crit :
>
> >> I am trying to develop a Wireshark plugin and am starting at the most
>
> >> basic level. I followed the instructions in the dev guide to create a
>
> >> basic dissector, basically copy and pasted 9.2.1 and changed foo to
>
> ccs. I
>
> >> used agentx MakeFiles as an example.
>
> >>
>
> >> I am developing on Windows using Visual Studio 2005. I have no
problem
>
> >> building the project or my plugin using the nmake utility. However
when
>
> I
>
> >> copy my plugin dll into the plugins/1.0.5 directory and execute
>
> Wireshark
>
> >> I get the following message.
>
> >>
>
> >> "Couldn't load module C:\Program
Files\Wireshark\plugins\1.0.5\ccs.dll:
>
> >> The Specified module could not be found."
>
> >>
>
> >> Any ideas what I might be doing wrong here?
>
> >>
>
> Hi!
>
> This is the tricky part of the current Microsoft compiler toolchain :-(
>
> As I've written most part of the Developer's Guide in that regard, I'm
>
> still not satisfied with it's current state regarding the new Studios
>
> (>V6). But I need some feedback, so please give detailed response :-)
>
> Unfortunately, you didn't noticed if you tried to run your plugin on the
>
> same (developer) machine where you've build it or on a different target
>
> machine.
>
> Two possible causes (at least I know of):
>
> 1) missing manifest infos
>
> 2) missing "C-Runtime "Redistributable" files"
>
> 1)
>
> The most likely reason is that you need the manifest information. Have a
>
> look at your Makefile.nmake you're using to build the ccs plugin. If it
>
> doesn't contain a line like mt.exe (I'm certain it won't), you need to
>
> copy the generated file ccs.dll.manifest along with your plugin,
>
> otherwise it won't work.
>
> 2)
>
> If you're trying to run it on a different target machine than your
>
> developer machine, this is often a problem due to the missing "C-Runtime
>
> "Redistributable" files" on the target machine. See:
>
>
http://www.wireshark.org/docs/wsdg_html_chunked/ChToolsMSChain.html#id4715
>
> 151
>
> for details.
>
> You can:
>
> a) take the folder content of Microsoft.VC80.CRT (located somewhere in
>
> the Studio dir c:\program files\...) and put the *content* of that dir
>
> where the Wireshark.exe resides (or probably in the plugins dir, unsure
>
> of the right location - please try it out and give feedback) or
>
> b) install the redistributable pack as mentioned on the linked page
>
> above. Make sure you have the right pack, depending if your Studio
>
> you're using to build the Wireshark plugin has an installed SP1 or not
>
> (if you find a different version number in the manifest file than in the
>
> web page above, then *please* report it)
>
> All in all, trying to run Wireshark plugins compiled with a different
>
> msvcr than Wireshark core *might* work or cause trouble. Please report
>
> success or strange behaviour ...
>
> Regards, ULFL
>
> P.S: Seems, that the plugin Makefile.nmake still don't contain the
>
> mt.exe call, we really need to change this! Any volounteers?
>
>
__________________________________________________________________________
>
> _
>
> Sent via: Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
>
> Archives: http://www.wireshark.org/lists/wireshark-dev
>
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>
> mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
>
>
__________________________________________________________________________
_
>
> Sent via: Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
>
> Archives: http://www.wireshark.org/lists/wireshark-dev
>
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>
> mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
>
> ------------------------------------------------------------------------
>
>
__________________________________________________________________________
_
> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives:    http://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>
mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe


--
Wireshark Generic Dissector http://wsgd.free.fr

__________________________________________________________________________
_
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev

mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe