Hi
It was my mistake, they are 90 and 91 only not 91 and 92 as stated first.
Regards,
Chandra.
________________________________
From: wireshark-dev-bounces@xxxxxxxxxxxxx on behalf of Abhik Sarkar
Sent: Tue 7/15/2008 5:41 PM
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] How to register the plugins
You said initially that the SSN's are 91 and 92, but you are
subsequently using 90 and 91 during registration... Not sure if that
is correct. If it isn't then XXX messages should be dissected as YYY
messages.
Also, you might want to not register the heuristic dissector and try.
HTH
Abhik.
On Tue, Jul 15, 2008 at 3:39 PM, <atdev.queries@xxxxxxxxx> wrote:
> Hi all,
>
>
>
> I wrote two plugins which run on sua layer. The plugins are xxx and yyy and
> their subsystem no. are 91 and 92 respectively.
>
>
>
> Now I registered the two protocols as
>
>
>
> For XXX plugin:
>
>
>
> static guint global_xxx_ssn = 90;
>
>
>
> Void proto_reg_handoff_xxx(void)
>
> {
>
> static dissector_handle_t xxx_handle;
>
> heur_dissector_add("sua", dissect_xxx, proto_xxx);
>
> xxx_handle = create_dissector_handle(dissect_xxx, proto_xxx);
>
> dissector_add("sccp.ssn", global_xxx_ssn, xxx_handle);
>
>
>
> }
>
>
>
> For YYY plugin:
>
>
>
> static guint global_yyy_ssn = 91;
>
>
>
> Void proto_reg_handoff_yyy(void)
>
> {
>
> static dissector_handle_t yyy_handle;
>
> heur_dissector_add("sua", dissect_yyy, proto_yyy);
>
> yyy_handle = create_dissector_handle(dissect_yyy, proto_yyy);
>
> dissector_add("sccp.ssn", global_yyy_ssn, yyy_handle);
>
>
>
> }
>
>
>
> Now the problem is the data what ever comes above sua layer is dissected as
> yyy protocol.
>
> The data which comes after yyy protocol is dissected as xxx protocol.
>
> But both the plugins should run on sua layer and depending on subsystem no.
> they have to be differentiated.
>
>
>
> Can any one please suggest me how to register the plugins properly so that
> then can be dissected properly on sua layer?
>
>
>
> Thanks in advance,
>
> Atdev.
>
> Please do not print this email unless it is absolutely necessary.
>
> The information contained in this electronic message and any attachments to
> this message are intended for the exclusive use of the addressee(s) and may
> contain proprietary, confidential or privileged information. If you are not
> the intended recipient, you should not disseminate, distribute or copy this
> e-mail. Please notify the sender immediately and destroy all copies of this
> message and any attachments.
>
> WARNING: Computer viruses can be transmitted via email. The recipient should
> check this email and any attachments for the presence of viruses. The
> company accepts no liability for any damage caused by any virus transmitted
> by this email.
>
> www.wipro.com
>
> _______________________________________________
> Wireshark-dev mailing list
> Wireshark-dev@xxxxxxxxxxxxx
> https://wireshark.org/mailman/listinfo/wireshark-dev
>
>
_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
https://wireshark.org/mailman/listinfo/wireshark-dev
Please do not print this email unless it is absolutely necessary.
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
www.wipro.com
<<winmail.dat>>
