Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-dev: Re: [Wireshark-dev] RUDP Plugin functional ?

From: "Jan Kokott" <Blind007@xxxxxx>
Date: Wed, 17 Jan 2007 14:05:25 +0100
Hi,

and thx again. Still lot of things to learn.
But the setting to 0 in the code itself has just been done to disable it, because it "collides with afs". At least that�s the comment in the .c file.

Regards

Jan


-------- Original-Nachricht --------
Datum: Wed, 17 Jan 2007 13:59:20 +0100
Von: Sebastien Tandel <sebastien@xxxxxxxxx>
An: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>
Betreff: Re: [Wireshark-dev] RUDP Plugin functional ?

> Hi,
> 
> You have to change the port while wireshark is running and not in the
> code of the RUDP dissector. You may do it in the protocol preferences
> (Edit->Preferences->protocol RUDP).
> 
> 
> Regards,
> 
> Sebastien Tandel
> 
> Jan Kokott wrote:
> > Hi,
> >
> > and thanks for the info. I tried to build a packet out of the rfc908
> which defined rdp and not rudp. And the RDP Header consists of quite different
> fields.
> >
> > Another thing I encountered was the line in the rudp plugin 
> >   static guint udp_port = 0;
> > I had to change this port to another one (ex.105) to get it working.
> >
> > At least I can now start to build the first parts of my zigbee plugin.
> >
> > Greetz 
> > Jan
> >
> > -------- Original-Nachricht --------
> > Datum: Mon, 15 Jan 2007 23:53:36 +0100 (CET)
> > Von: Jaap Keuter <jaap.keuter@xxxxxxxxx>
> > An: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>
> > Betreff: Re: [Wireshark-dev] RUDP Plugin functional ?
> >
> >   
> >> Hi,
> >>
> >> RUDP is implemented as a plugin. Its default UDP port is 0, so you'll
> have
> >> to change this preference to get it to work, and I think a restart of
> >> Wireshark as well.
> >> Mind you, it's on top of UDP.
> >>
> >> Thanx,
> >> Jaap
> >>
> >> On Mon, 15 Jan 2007, Jan Kokott wrote:
> >>
> >>     
> >>> That is correct.
> >>> And as I said, I modified the packet to the definition of RUDP (rfc908
> >>>       
> >> Chapter 4). The only thing that is unmodified is the IP and Ethernet
> >> Header.(with the modification in the Type declaration).
> >>     
> >>> As much as i understand of RUDP it is also encapsulated in IP so I
> added
> >>>       
> >> the Information to the existing body.
> >>     
> >>> Did anybody test the plugin recently ?
> >>> I just wanted to know if it does what it´s supposed to do and why
> it
> >>>       
> >> analyses my packet, regardless of the plugin being installed or the
> plugin
> >> removed.
> >>     
> >>>
> >>>
> >>> -------- Original-Nachricht --------
> >>> Datum: Mon, 15 Jan 2007 20:07:22 +0100
> >>> Von: Andreas Fink <afink@xxxxxxxxxxxxx>
> >>> An: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>
> >>> Betreff: Re: [Wireshark-dev] RUDP Plugin functional ?
> >>>
> >>>       
> >>>> I dont think a TCP Ack packet looks any similar to a RUDP ACK packet.
> >>>> Simply because RUDP is a UDP packet and then a IP packet while a TCP
> >>>> ACK packet is a IP packet. Also the structuring of ACK packets in
> >>>> RUDP and TCP are totally different.
> >>>>
> >>>> On 15.01.2007, at 17:57, Jan Kokott wrote:
> >>>>
> >>>>         
> >>>>> Hi,
> >>>>>
> >>>>> is the RUDP Plugin working ?
> >>>>> I am trying around a bit with it in order to see how my own
> >>>>> dissector should work.
> >>>>> I tried to build a little rudp-ack packet out of a tcp-ack packet
> >>>>> which I modified with an editor(Protocol-Type 0x1b...).
> >>>>> The Info column says "Reliable Data (ox1b)" but that´s all.
> >>>>> The Ethernet and IP Header are fragmented correctly, but everything
> >>>>> after the Destination IP is marked as "Data".
> >>>>> When I delete the .la and the .so from the plugin folder, rudp isn
> >>>>> ´t listed in the plugin section anymore.
> >>>>> But Wireshark displays the same info about my packet "Reliable Data
> >>>>> (ox1b)" and insists on "Data" instead of reading the rudp Header.
> >>>>> I was just playing around with an easy to understand plugin in
> >>>>> order to get my own up and working.
> >>>>>
> >>>>> Greetz   Jan
> >>>>> _______________________________________________
> >>>>> Wireshark-dev mailing list
> >>>>> Wireshark-dev@xxxxxxxxxxxxx
> >>>>> http://www.wireshark.org/mailman/listinfo/wireshark-dev
> >>>>>           
> >>>>
> >>>>
> >>>>
> >>>> Andreas Fink
> >>>>
> >>>> Fink Consulting GmbH
> >>>> Global Networks Schweiz AG
> >>>> BebbiCell AG
> >>>>
> >>>> ---------------------------------------------------------------
> >>>> Tel: +41-61-6666330 Fax: +41-61-6666331  Mobile: +41-79-2457333
> >>>> Address: Clarastrasse 3, 4058 Basel, Switzerland
> >>>> E-Mail:  andreas@xxxxxxxx
> >>>> www.finkconsulting.com www.global-networks.ch www.bebbicell.ch
> >>>> ---------------------------------------------------------------
> >>>> ICQ: 8239353 MSN: msn1@xxxxxx AIM: smsrelay Skype: andreasfink
> >>>> Yahoo: finkconsulting SMS: +41792457333
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>         
> >>> _______________________________________________
> >>> Wireshark-dev mailing list
> >>> Wireshark-dev@xxxxxxxxxxxxx
> >>> http://www.wireshark.org/mailman/listinfo/wireshark-dev
> >>>
> >>>
> >>>       
> > _______________________________________________
> > Wireshark-dev mailing list
> > Wireshark-dev@xxxxxxxxxxxxx
> > http://www.wireshark.org/mailman/listinfo/wireshark-dev
> >   
> 
> _______________________________________________
> Wireshark-dev mailing list
> Wireshark-dev@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-dev