https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=7459
Summary: Name Resolution settings on View menu out of sync with
Edit Preferences menu
Product: Wireshark
Version: 1.9.x (Experimental)
Platform: x86
OS/Version: Windows XP
Status: NEW
Severity: Normal
Priority: Low
Component: Wireshark
AssignedTo: bugzilla-admin@xxxxxxxxxxxxx
ReportedBy: Jim@xxxxxxxxxxxxxxxxx
Build Information:
Version 1.9.0-SVN-43626 (SVN Rev 43626 from /trunk)
Copyright 1998-2012 Gerald Combs <gerald@xxxxxxxxxxxxx> and contributors.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Compiled (32-bit) with GTK+ 2.24.10, with Cairo 1.10.2, with Pango 1.30.0, with
GLib 2.32.2, with WinPcap (4_1_2), with libz 1.2.5, without POSIX capabilities,
without libnl, with SMI 0.4.8, with c-ares 1.7.1, with Lua 5.1, without Python,
with GnuTLS 2.12.18, with Gcrypt 1.4.6, with MIT Kerberos, with GeoIP, with
PortAudio V19-devel (built Jul 9 2012), with AirPcap.
Running on Windows XP Service Pack 3, build 2600, with WinPcap version 4.1.2
(packet.dll version 4.1.0.2001), based on libpcap version 1.0 branch 1_0_rel0b
(20091008), GnuTLS 2.12.18, Gcrypt 1.4.6, without AirPcap, from the
PortableApps U3 device in drive E:.
Built using Microsoft Visual C++ 10.0 build 40219
--
Enabling or disabling MAC, network, or transport name resolution behaves
differently depending on whether the settings are changed via View > Name
Resolution or via Edit Preferences > Name Resolution.
If a name resolution setting is changed under View > Name Resolution, the
display will not update until the trace file is reloaded. Whatever change was
made under View > Name Resolution will appear under Edit Preferences > Name
Resolution.
If a name resolution setting is changed under Edit Preferences > Name
Resolution, the view will update as soon as Apply is clicked; there is no need
to reload the trace file. However, the check marks under View > Name Resolution
will not update to match the change that was made under Edit Preferences > Name
Resolution.
TO RECREATE:
Launch Wireshark. Verify that the check marks/settings under View > Name
Resolution match the settings under Edit Preferences > Name Resolution.
An easy way to observe this behavior without generating a lot of DNS traffic is
to apply a display filter to show only ARP traffic and then toggle the MAC name
resolution setting.
Load a trace file. Go to View > Name Resolution and change one of the settings.
The display will not change. Now click Reload. The display will update to match
the new setting. Go to Edit Preferences > Name Resolution and note that the
check marks have changed to match the setting change that was made under View >
Name Resolution.
Now change a setting from Edit Preferences > Name Resolution. Click Apply. The
display will change immediately. Go to View > Name Resolution and note that the
check marks have not updated to match the change that was made under Edit
Preferences > Name Resolution.
--
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
