ANNOUNCEMENT: Live Wireshark University & Allegro Packets online APAC Wireshark Training Session
April 17th, 2024 | 14:30-16:00 SGT (UTC+8) | Online

Wireshark-bugs: [Wireshark-bugs] [Bug 3315] Segments of reassembled PDU's not saved when saving

Date: Thu, 5 Jul 2012 00:34:53 -0700 (PDT)
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3315

YLT <yvanmmailbox-wireshark@xxxxxxxx> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |yvanmmailbox-wireshark@yaho
                   |                            |o.fr

--- Comment #30 from YLT <yvanmmailbox-wireshark@xxxxxxxx> 2012-07-05 00:34:51 PDT ---
(In reply to comment #26)
> (In reply to comment #20)
> > Turns out this wasn't quite as complicated as I had thought; I fixed it in
> > r41216.  You can read the rather long checkin comment here:
> > 
> > http://anonsvn.wireshark.org/viewvc/viewvc.cgi?view=rev&revision=41216
> > 
> > It hasn't been tested on Windows yet (Windows uses a different Save-As dialog
> > than other platforms).
> > 
> > It seems to work well for me with reassembled SCTP and TCP packets. 
> > Reassembled IP packets "should" work but I didn't have any sample captures
> > using IP fragmentation handy.
> > 
> > If you're interested (and it actually compiles ;-)), you can try it out after a
> > few hours with one of the buildbot builds:
> > 
> > http://www.wireshark.org/download/automated/
> > 
> > Any feedback is welcome.
> 
> Thanks for this long-awaited fix! I confirm it works perfectly for reassembled
> IP packets (tested with fragmented SIP packets in UDP) when saving with a
> display filter.
> 
> But it still does not work when saving "marked" packets when some are
> reassembled. So I propose the following improvement:
> When marking a reassembled packet, it will automatically mark the corresponding
> fragmented packets too. So when saving with "marked" packets, everything will
> be saved.

Hello,

I tried this fix on Windows XP 32-bit with rev41804 (v1.4.12) and rev42761
(v1.6.8)with IP fragmented packets, and UDP display filter. It doesn't seem to
work.
Has anyone checked it on Windows?
I will try to provide capture if necessary.

Regards,

-- 
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
You are watching all bug changes.