Huge thanks to our Platinum Members Endace and LiveAction,
and our Silver Member Veeam, for supporting the Wireshark Foundation and project.

Wireshark-bugs: [Wireshark-bugs] [Bug 3047] New: IPv6 Only Interface Shows IPv4 autoconfig addre

Date: Sat, 8 Nov 2008 17:40:10 -0800 (PST)
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3047

           Summary: IPv6 Only Interface Shows IPv4 autoconfig address in
                    Capture Interfaces.
           Product: Wireshark
           Version: 1.0.3
          Platform: PC
        OS/Version: Windows XP
            Status: NEW
          Severity: Normal
          Priority: Low
         Component: Wireshark
        AssignedTo: wireshark-bugs@xxxxxxxxxxxxx
        ReportedBy: ctempleton3@xxxxxxxxx


Build Information:
Version 1.0.3 (SVN Rev 26134)

Copyright 1998-2008 Gerald Combs <gerald@xxxxxxxxxxxxx> and contributors.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Compiled with GTK+ 2.12.8, with GLib 2.14.6, with WinPcap (version unknown),
with libz 1.2.3, without POSIX capabilities, with libpcre 7.0, with SMI 0.4.8,
with ADNS, with Lua 5.1, with GnuTLS 2.3.8, with Gcrypt 1.4.1, with MIT
Kerberos, with PortAudio V19-devel, with AirPcap.

Running on Windows XP Service Pack 3, build 2600, with WinPcap version 4.0.2
(packet.dll version 4.0.0.1040), based on libpcap version 0.9.5, without
AirPcap.

Built using Microsoft Visual C++ 6.0 build 8804

Wireshark is Open Source Software released under the GNU General Public
License.

Check the man page and http://www.wireshark.org for more information.
--
I am running Gateway6 to tunnel into the ipv6 network. When I go to the capture
interface screen it shows an IPv4 address of 169.254.195.209 (autoconfig
address see ipconfig data at
http://forum.go6.net/viewtopic.php?p=662&sid=c6cc71e5c73bea1f5027c56622ed6622)
instead of one of  the IPv6 addresses. The tunnel interface shows no IPv4
addresses when an ipconfig /all is done. (I have disabled ipv4 for the tunnel
interface for the interface).

Tunnel adapter Teredo Tunneling Pseudo-Interface:

        Connection-specific DNS Suffix  . : 
        Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
        Physical Address. . . . . . . . . : FF-FF-FF-FF-FF-FF-FF-FF
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : fe80::ffff:ffff:fffd%6
        Default Gateway . . . . . . . . . : 
        NetBIOS over Tcpip. . . . . . . . : Disabled

Ethernet adapter Gateway6 IPv6 Tunnel:

        Connection-specific DNS Suffix  . : 
        Description . . . . . . . . . . . : 
        Physical Address. . . . . . . . . : 02-50-F2-00-00-01
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 2001:5c0:a179::1
        IP Address. . . . . . . . . . . . : 2001:5c0:8fff:fffe::c81d
        IP Address. . . . . . . . . . . . : fe80::50:f2ff:fe00:1%4
        Default Gateway . . . . . . . . . : ::
        DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                            fec0:0:0:ffff::2%1
                                            fec0:0:0:ffff::3%1
        NetBIOS over Tcpip. . . . . . . . : Disabled


-- 
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.